Product Detail
Concrex® Fine Filler repairs minor imperfections in floors before painting. Concrex Fine Filler is extremely strong and economical to use - mix only what you need. Paint the finished repair with any coating or leave it as-is.
Features and Benefits of Concrex® Fine Filler:
- Ideal for repairing scratches, holes, gaps, cracks and pitted floors or vertical surfaces
- Easy to mix 50:50 ratio by weight or by volume
- Resistant to most industrial chemicals
- Ready for use in 3 - 6 hours
- A 3 lb. kit makes approximately 2 pints of filler
- Suitable for concrete and metal
- For use on interior and exterior substrates
For holes or patches slightly larger but under 2" we suggest using Concrex Epoxy Repair Mortar Standard, or Concrex Deep Fill Epoxy Repair Mortar for holes and patches up to 4" deep.
Specifications
| Properties: | Non shrink, two part liquid epoxy, can be coated, fast curing, ideal for cracks up to 2-3mm wide, its liquid formulation ensures that no sanding down will be needed to make it level once cured. |
| Usage Interior/Exterior: | Interior or Exterior |
| Suitable for: | Concrete, cement and metal |
| Coverage: | 3 lb. kit produces 2 pints of filler |
| Pot Life: | 15 - 20 Minutes |
| Curing Time (Hours): | 3 to 6 hours at 60-70°F |
How to Apply
Surface Preparation
Surfaces must be sound, clean and free from dust, oil, grease or other contaminants. Some surface dampness can be tolerated, but surfaces should not be wet.
Mixing
Wear the gloves provided in the pack. Mix ratio: 1:1 by weight or volume. Using the mixing sticks provided, take equal sized portions of the resin (off white), and curing agent (black), and mix them together thoroughly on a suitable mixing board until they are a uniform gray color. Try to be as accurate as possible in estimating equal quantities, but there is no need to weigh or measure them. Pot life is approximately 15-20 minutes. Make sure not to mix more filler than can be applied in this time limit.
Application
Using the plastic scraper provided, press the mixed components into the repair and smooth off the surface. Any spillages should be scraped away or wiped off with a dry cloth. The finished repair may be filed, sawn or drilled. Take care not to inhale the dust from these operations. Finished, hardened repairs may be painted after 12 hours/overnight curing and light sanding.
Data Sheet
Concrex® Fine Filler repairs minor imperfections in floors before painting. Concrex Fine Filler is extremely strong and economical to use - mix only what you need. Paint the finished repair with any coating or leave it as-is.
Features and Benefits of Concrex® Fine Filler:
- Ideal for repairing scratches, holes, gaps, cracks and pitted floors or vertical surfaces
- Easy to mix 50:50 ratio by weight or by volume
- Resistant to most industrial chemicals
- Ready for use in 3 - 6 hours
- A 3 lb. kit makes approximately 2 pints of filler
- Suitable for concrete and metal
- For use on interior and exterior substrates
For holes or patches slightly larger but under 2" we suggest using Concrex Epoxy Repair Mortar Standard, or Concrex Deep Fill Epoxy Repair Mortar for holes and patches up to 4" deep.
| Properties: | Non shrink, two part liquid epoxy, can be coated, fast curing, ideal for cracks up to 2-3mm wide, its liquid formulation ensures that no sanding down will be needed to make it level once cured. |
| Usage Interior/Exterior: | Interior or Exterior |
| Suitable for: | Concrete, cement and metal |
| Coverage: | 3 lb. kit produces 2 pints of filler |
| Pot Life: | 15 - 20 Minutes |
| Curing Time (Hours): | 3 to 6 hours at 60-70°F |
Surface Preparation
Surfaces must be sound, clean and free from dust, oil, grease or other contaminants. Some surface dampness can be tolerated, but surfaces should not be wet.
Mixing
Wear the gloves provided in the pack. Mix ratio: 1:1 by weight or volume. Using the mixing sticks provided, take equal sized portions of the resin (off white), and curing agent (black), and mix them together thoroughly on a suitable mixing board until they are a uniform gray color. Try to be as accurate as possible in estimating equal quantities, but there is no need to weigh or measure them. Pot life is approximately 15-20 minutes. Make sure not to mix more filler than can be applied in this time limit.
Application
Using the plastic scraper provided, press the mixed components into the repair and smooth off the surface. Any spillages should be scraped away or wiped off with a dry cloth. The finished repair may be filed, sawn or drilled. Take care not to inhale the dust from these operations. Finished, hardened repairs may be painted after 12 hours/overnight curing and light sanding.
