Product Detail
Safety Tape Primer will improve adhesion on dusty, porous or gritty surfaces. Apply just one coat of this water-based primer by brush and allow to dry (for 30 minutes) before applying non slip safety tape or stair treads. Not required on smooth, non porous surfaces such as paint, varnish, tiles, etc. Do not apply to metal.
Features and Benefits of Safety Tape Primer:
- Gives better adhesion on poor surfaces
- Covers approximately 20 to 30 sq. ft. per 34 fl. oz.
A pint of primer is sufficient for the following:
- 6 - Safety Tape 2 x 60 ft. rolls
- 30 - Slip Free Treads 6" x 24 ft.
- 2 units are required for the 2 ft. x 60 ft. Slip Free Rolls
Specifications
| Usage Interior/Exterior: | Interior or Exterior |
| Suitable for: | Concrete, wood, porous surfaces |
| Coverage: | 1 pint: 6 - safety tape rolls 2" x 60 ft., 30 - slip free stair treads 6" x 24" |
| Curing Time (Hours): | 1 hour at 50 to 60°F |
How to Apply
Safety Tape Primer will improve adhesion on dusty, friable surfaces. Not required on smooth, non porous surfaces such as paint, varnish, tiles etc. Do not apply to metal.
Application: After stirring, apply one coat of primer by brush at a coverage rate of approximately 2-3m2 per 500ml. Allow to dry (the product is milky when applied, then turns clear upon drying). Dries in 1 hour at 50-60°F. Only apply the primer to the area that will be covered by the tape or tread. Uncovered primer could remain tacky and attract dirt. Apply the Safety Tape or Slip Free products according to the instructions.
Limitations: Do not apply in wet conditions or at temperatures below 50°F
Data Sheet
Safety Tape Primer will improve adhesion on dusty, porous or gritty surfaces. Apply just one coat of this water-based primer by brush and allow to dry (for 30 minutes) before applying non slip safety tape or stair treads. Not required on smooth, non porous surfaces such as paint, varnish, tiles, etc. Do not apply to metal.
Features and Benefits of Safety Tape Primer:
- Gives better adhesion on poor surfaces
- Covers approximately 20 to 30 sq. ft. per 34 fl. oz.
A pint of primer is sufficient for the following:
- 6 - Safety Tape 2 x 60 ft. rolls
- 30 - Slip Free Treads 6" x 24 ft.
- 2 units are required for the 2 ft. x 60 ft. Slip Free Rolls
| Usage Interior/Exterior: | Interior or Exterior |
| Suitable for: | Concrete, wood, porous surfaces |
| Coverage: | 1 pint: 6 - safety tape rolls 2" x 60 ft., 30 - slip free stair treads 6" x 24" |
| Curing Time (Hours): | 1 hour at 50 to 60°F |
Safety Tape Primer will improve adhesion on dusty, friable surfaces. Not required on smooth, non porous surfaces such as paint, varnish, tiles etc. Do not apply to metal.
Application: After stirring, apply one coat of primer by brush at a coverage rate of approximately 2-3m2 per 500ml. Allow to dry (the product is milky when applied, then turns clear upon drying). Dries in 1 hour at 50-60°F. Only apply the primer to the area that will be covered by the tape or tread. Uncovered primer could remain tacky and attract dirt. Apply the Safety Tape or Slip Free products according to the instructions.
Limitations: Do not apply in wet conditions or at temperatures below 50°F
|
pdf
SDS C440082 safety tape primer 34fl oz.pdf
|
|
pdf
SDS C440090 safety tape primer 1pint.pdf
|
|
pdf
TDS Safety Tape Primer and Sealer.pdfpdf
|
